FV-KUPPLUNG model: FV-6D-176
Nominal torque: 5.000 Nm
Maximum torque: 10.000 Nm
Max speed: 3.500 rpm
FV-KUPPLUNG for wind generator SEEWIND. Special extra short design with flange according customer specifications.
Category Archives: News
Wrap your lamina coupling! It will be protected from dust!
In dusty areas the small grains that slip between the plates during the operation of the coupling cause unexpected breakages. Technical department of FV-KUPPLUNG has developed a new solution to protect transmission couplings from dust.
The plastic film wraps the plates and protects them from dirt and external agents. The grains of abrasive powder will no longer fit between the plates. The cover is highly elastic, resistant to abrasion and does not affect the correct functioning of the coupling.
This new technology, extremely economical, is able to increase the service life of your mechanical transmissions.
For more info, please send an e-mail to: info@fv-kupplung.com
FV-KUPPLUNG: Precision couplings for torque transducers
What is the best coupling for transducers? The common choice is torsionally rigid coupling without angular play, but finding the best design that suits the needs of each application is not easy.
The FV-KUPPLUNG plate packs coupling with their modular design can adapt to any constructive requirement.
TRANSDUCER COUPLING
FV-KUPPLUNG FOR TRANSDUCER 5KNm
Special design with complete coupling with two plates packs in one side and shrink disc in driven side.
For more information contact us: info@fv-kupplung.com
FV-KUPPLUNG VIDEO – Assembly of coupling with minimum DBSE
Connect two shafts with minimum distance between shaft ends (DBSE) may be problematic if you want to use a torsionally rigid disc coupling.
The available distance does not allow inserting a spacer between the shafts. The spacer is required to allow the installation of two plates packs that can absorb a parallel (radial) misalignment. In fact, with only one plates group, only axial and angular deviations can be compensated.
Many manufacturers have designed couplings, with a special design, can fit two packs, thus ensuring full flexibility of the system. Most of these construction forms do not, however, replace the plates without disassembling or removing the connected machinery.
FV-KUPPLUNG: NEW DRUM COUPLINGS
News for FV-KUPPLUNG product range, new rollers couplings for drums (FV-X) and couplings with brake disc (FV-A-BRAKE DISC):
FV-X
- Admissible torque from 6.500 Nm to 1.050.000 Nm
- Perfectly interchangeable with model “Industrial standard” of the reference field
- Designed for high transmission torque and radial forces
Download the catalog to the link: http://www.favari.it/download/FV-X.pdf
HOW CONNECT AN AUXILIARY GEARBOX?
FV-KUPPLUNG provided a gear disengageable coupling complete of bell-housing and hand lever.
ZERO BACKLASH COUPLINGS. FV-KUPPLUNG FV-WSV
The new zero backlash couplings FV-KUPPLUNG model FV-WSV , thanks to the special design, can ensure 20% more torque than before and more than double compared to the “spiral couplings”.
FV-WSV
The constructive material can be aluminum, steel or stainless steel. The high torsional rigidity and the absence of angular backlash make it an effective choice for the connection of actuators and for all applications where it is required angular accuracy. Combined with the metal plates couplings FV-A, which are also available with clamping hubs, you can have a complete solution that guarantees reliability and convenience.
The FV-WSV servo couplings are available for shaft diameters from 3 to 40mm. Outer hub 16 to 80mm and nominal torques up to 220nm!
Download the complete catalog FV-KUPPLUNG at: Clik here.
Request information: info@fv-kupplung.com
FV-KUPPLUNG – PIN COUPLING FOR ROPEWAYS
PIN COUPLING FV-KUPPLUNG
FV-Kupplung model: FVPL60
Nominal torque: 50.000 Nm
Maximum torque: 100.000 Nm
Maximum speed: 1.100 rpm
FV-KUPPLUNG for ropeway drive. Alternative design to Flender RUPEX RWN 630. Hubs with spline according DIN 5480.
FV-KUPPLUNG for pumps according to API
FV-KUPPLUNG FV-6G
FV-Kupplung model: FV-6G-140
Rated torque: 2.400 Nm
Maximum torque: 4.800 Nm
Maximum speed: 4.400 rpm
FV-KUPPLUNG for pumps. Design according to API, ATEX CE Ex possible on request.
FV-KUPPLUNG for recoiler/uncoiler – Steel industry
FV-Kupplung model: FV-6A-186
Rated torque: 6.000 Nm
Maximum torque: 12.000 Nm
Maximum speed: 3.400 rpm
FV-KUPPLUNG for recoiler / uncoiler. Special design alternative model Flender ARPEX 210-6