FV-kupplung https://www.fv-kupplung.com/en/ Giunti a lamelle - a pioli - a denti - a spirale - a morsetto Thu, 31 May 2018 11:28:29 +0000 en-US hourly 1 https://wordpress.org/?v=5.3.4 FV-KUPPLUNG – Special coupling for wind generator SEEWIND https://www.fv-kupplung.com/en/fv-kupplung-special-coupling-for-wind-generator/ Thu, 24 May 2018 08:41:12 +0000 http://www.fv-kupplung.com/?p=2229/ FV-KUPPLUNG model:  FV-6D-176 Nominal torque:  5.000 Nm Maximum torque:  10.000 Nm Max speed: 3.500 rpm FV-KUPPLUNG for wind generator SEEWIND. Special extra short design with flange according customer specifications.  

The post FV-KUPPLUNG – Special coupling for wind generator SEEWIND appeared first on FV-kupplung.

]]>
Wrap your lamina coupling! It will be protected from dust! https://www.fv-kupplung.com/en/wrap-your-lamina-coupling-it-will-be-protected-from-dust/ Thu, 08 Mar 2018 15:29:18 +0000 http://www.fv-kupplung.com/?p=2174/ In dusty areas the small grains that slip between the plates during the operation of the coupling cause unexpected breakages. Technical department of FV-KUPPLUNG  has developed a new solution to protect transmission couplings from dust. The plastic film wraps the plates and protects them from dirt and external agents. The grains of abrasive powder will no longer fit between the plates. […]

The post Wrap your lamina coupling! It will be protected from dust! appeared first on FV-kupplung.

]]>
FV-KUPPLUNG: Precision couplings for torque transducers https://www.fv-kupplung.com/en/fv-kupplung-precision-couplings-for-torque-transducers/ Tue, 18 Jul 2017 07:22:52 +0000 http://www.fv-kupplung.com/?p=2155/ What is the best coupling for transducers? The common choice is torsionally rigid coupling without angular play, but finding the best design that suits the needs of each application is not easy. The FV-KUPPLUNG plate packs coupling with their modular design can adapt to any constructive requirement.   FV-KUPPLUNG FOR TRANSDUCER  5KNm Special design with complete coupling with […]

The post FV-KUPPLUNG: Precision couplings for torque transducers appeared first on FV-kupplung.

]]>
FV-KUPPLUNG VIDEO – Assembly of coupling with minimum DBSE https://www.fv-kupplung.com/en/fv-kupplung-video-assembly-of-coupling-with-minimum-dbse/ Fri, 30 Jun 2017 09:08:39 +0000 http://www.fv-kupplung.com/?p=2147/ Connect two shafts with minimum distance between shaft ends (DBSE) may be problematic if you want to use a torsionally rigid disc coupling. The available distance does not allow inserting a spacer between the shafts. The spacer is required to allow the installation of two plates packs that can absorb a parallel (radial) misalignment. In fact, with […]

The post FV-KUPPLUNG VIDEO – Assembly of coupling with minimum DBSE appeared first on FV-kupplung.

]]>
FV-KUPPLUNG: NEW DRUM COUPLINGS https://www.fv-kupplung.com/en/fv-kupplung-new-drum-couplings/ Thu, 08 Jun 2017 14:55:15 +0000 http://www.fv-kupplung.com/?p=1960/ News for FV-KUPPLUNG product range, new rollers couplings for drums (FV-X) and couplings with brake disc (FV-A-BRAKE DISC):   FV-X Admissible torque from 6.500 Nm to 1.050.000 Nm Perfectly interchangeable with model “Industrial standard” of the reference field Designed for high transmission torque and radial forces Download the catalog to the link:  http://www.favari.it/download/FV-X.pdf FV-A-BRAKE DISC […]

The post FV-KUPPLUNG: NEW DRUM COUPLINGS appeared first on FV-kupplung.

]]>
HOW CONNECT AN AUXILIARY GEARBOX? https://www.fv-kupplung.com/en/connect-an-auxiliary-gearbox/ Fri, 10 Feb 2017 16:49:20 +0000 http://www.fv-kupplung.com/?p=1926/ FV-KUPPLUNG provided a gear disengageable coupling complete of bell-housing and hand lever. Complete disengageable system CMD-014 consist of gear coupling FV-F-178-DI with bell housing and lever. The system will connect a planetary gearbox to industrial bevel gearbox. The lever will be equipped with two electrical sensors. FV-KUPPLUNG GEAR COUPLING TYPE: FV-F_178-DI TkN: 9.000 Nm D1/D2: Ø65/90mm Speed: […]

The post HOW CONNECT AN AUXILIARY GEARBOX? appeared first on FV-kupplung.

]]>
ZERO BACKLASH COUPLINGS. FV-KUPPLUNG FV-WSV https://www.fv-kupplung.com/en/zero-backlash-couplings-fv-kupplung-fv-wsv/ Mon, 28 Nov 2016 16:03:43 +0000 http://www.fv-kupplung.com/en/?p=1816 The new zero backlash couplings FV-KUPPLUNG  model FV-WSV , thanks to the special design, can ensure 20% more torque than before and more than double compared to the “spiral couplings”. The constructive material can be aluminum, steel or stainless steel. The high torsional rigidity and the absence of angular backlash make it an effective choice for the […]

The post ZERO BACKLASH COUPLINGS. FV-KUPPLUNG FV-WSV appeared first on FV-kupplung.

]]>
FV-KUPPLUNG – PIN COUPLING FOR ROPEWAYS https://www.fv-kupplung.com/en/fv-kupplung-pin-coupling-for-ropeways-2/ Thu, 28 Jul 2016 08:56:29 +0000 http://www.fv-kupplung.com/fv-kupplung-pin-coupling-for-ropeways-2/ FV-Kupplung model:  FVPL60 Nominal torque:  50.000 Nm Maximum torque:  100.000 Nm Maximum speed: 1.100 rpm FV-KUPPLUNG for ropeway drive. Alternative design to Flender RUPEX RWN 630. Hubs with spline according DIN 5480.

The post FV-KUPPLUNG – PIN COUPLING FOR ROPEWAYS appeared first on FV-kupplung.

]]>
FV-KUPPLUNG for pumps according to API https://www.fv-kupplung.com/en/fv-kupplung-for-pumps-according-to-api/ Wed, 01 Jun 2016 14:56:00 +0000 http://www.fv-kupplung.com/fv-kupplung-for-pumps-according-to-api/ FV-Kupplung model: FV-6G-140 Rated torque: 2.400 Nm Maximum torque: 4.800 Nm Maximum speed: 4.400 rpm FV-KUPPLUNG for pumps. Design according to API, ATEX CE Ex possible on request.

The post FV-KUPPLUNG for pumps according to API appeared first on FV-kupplung.

]]>
FV-KUPPLUNG for recoiler/uncoiler – Steel industry https://www.fv-kupplung.com/en/fv-kupplung-for-recoileruncoiler-steel-industry/ Thu, 12 May 2016 14:07:47 +0000 http://www.fv-kupplung.com/fv-kupplung-for-recoileruncoiler-steel-industry/ FV-Kupplung model: FV-6A-186 Rated torque: 6.000 Nm Maximum torque: 12.000 Nm Maximum speed: 3.400 rpm FV-KUPPLUNG for recoiler / uncoiler. Special design alternative model Flender ARPEX 210-6

The post FV-KUPPLUNG for recoiler/uncoiler – Steel industry appeared first on FV-kupplung.

]]>